Have you ever looked at a crack in the wall, or a bulge in your paving, and wondered how you’re going to fix it? For most people this is a real problem, because it is going to cost you a lot of time and money… but it doesn’t have to. With the help of your local construction material suppliers and sand suppliers you have access to two affordable materials that can make a big job so much simpler: sand and plaster.
Repair uneven paving with minimal fuss
Especially with the recent heavy rainfall in Gauteng, lots of people are having trouble with their paving. Uneven paving can be a major eyesore, and it’s pricey to get somebody in to fix it, so let your sand supplier help you do it yourself.
All you need to do is use a flat screwdriver to lift up the bricks in the affected area, as a start. Once the entire area is open you can throw down some soil and sand. Just make sure that you even it all out nicely to match up with the rest of your paving once you replace the bricks.
Once your filling is level you can start replacing the bricks. If any of them have been damaged or are looking a little worn, just grab a few replacements from a nearby construction material supplier. Once the bricks are in place you can throw some sand down again and sweep it into the gaps with a broom. Then all you need to do is spray some water over your paving, let it set, and you’re good to go!
Give your walls a happy new face
Do you have any cracks in your walls, or bricks that are looking a little worn and crumbly? Not a problem! All you need is a plaster sand supplier, or you could even get a bulk supply of plaster sand and cement from a construction material supplier. With these materials ready, you are set to mix up some plaster to give your walls a makeover.
Now, plaster can be tricky to work with, soit is advisable to hire a skilled plasterer or get solid advice from your plaster sand supplier before taking on the task yourself. Either way, the process will include cleaning any old or loose material from your wall, preparing your plaster mixture, and getting that plaster onto your wall. I’ll spare you the step-by-step on this, but you do need to make sure this is done properly to ensure results.
Once the fresh plaster has been applied you need to give it time to dry and set. Once your plaster has been evened out, dried and set, you’ll have a smooth grey surface just waiting for a coat of paint. So splash on some plaster primer and then get painting. Your creativity is your only limit from here.
The one thing all of this relies on is getting the correct materials. Do yourself a favour and make sure you find a reliable construction material supplier. Then keeping your home looking great is easy!